In a 123ignition, all moving parts like the original points, the centrifugal weights, the springs, the bearings and the vacuum-diaphragm have been replaced with just one moving part: the central shaft with the rotor. The internal electronics provide the right advance and the optimum dwell-angle throughout the revolutions range to maintain peak energy and peak performance. There is no wear altering the timing of the 123ignition: once set, you’ll never have to worry about it again!
The 123/GB-4-R-V replaces most Lucas-distributors for engines in British (hence ‘GB’) cars, with a 4 cylinder engine (negative ground only). The unit offers 16 different advance-curves, which can be selected by means of a small switch. This is a great feature to easily fine-tune your engine!
Aston Martin, Austin, Landrover, Morgan, Morris, Rover and Triumph
There are dedicated 123-ignitions for Mini, Jaguar & MG.
voltage: 4,0-15,0 Volts
range: 500 – 8000 rpm
temperature: -30 to 100 Celsius
coil: stock or High Energy coil, primary coil NOT below 1,0 ohm
dwell: constant current, fully autom.
time-out: after 1 second current is switched off
spark-bal.: better than 0,5 degr. crankshaft
vacuum: starts at 100 mmHg, ends at 10 degr. @ 300 mmHg
max.advance: 45 degr. crankshaft
wiring: red = +6V or +12V, black = ‘-‘ coil
|advance starts||max. advance||vac. adv. starts||max. vac. adv.|
|curve||[rpm crankshaft]||[rpm/||degr. crankshaft]||[mmHg]||[mmHg/||degr.]||replaces||remark|
We can also provide a fitting service for your car. If you have any questions regarding your car, contact us here at email@example.com
The 123/GB-4-R-V distributor replaces most Lucas-distributors for 4 cylinder engines
The unit offers 16 different advance-curves, which can be selected by means of a small switch. This is a great feature to easily fine-tune your engine!
Features of the 123ignition 123/GB-4-R-V
– Automatic dwell
– Spark balancing
– Automatic power-cut after 1 second
– Gear shift retard
– etc. etc.
Please note the following about the 123/GB
We strongly advise you to check the dimensions of the 123/GB with the original distributor.