The electrical HARDI Fuel Pump is a diaphragm pump. Opposed to mechanical fuel pumps it has its own propulsion (an electric motor or a solenoid coil), which ensures a smooth functioning independent of the engine.
All HARDI-Pumps have a special control system that enables the adaption of the pumping capacity to the consumption of the engine. This means, it will pump fast at high consumption, slow or not at all at low consumption and therefore a great deal of energy is saved (flexible stroke frequency).
Feeding capacity: 60-80l / h
Pressure in bar: 0.13-0.20
Starting voltage: 8,5-9,5V
Rated voltage: 12V
Current consumption: 1.5-1.9A
suction height: <1,5mtr.
Weight: approx. 900g
Spigot: 8mm swiveling
independent of the engine
easy to assemble
last until -40 ° C
warm to + 80 ° C
unleaded petrol, diesel, methanol and ethanol containing fuels
Hydraulic performance of the pump adapts to consumption
For safety reasons, we strongly recommend the use of a safety shutdown during installation!
Supplied with: Clamp with rubber, screw & Mother; Manual
We strongly recommend using a fuel filter between the fuel tank and the fuel pump.